Many people are no strangers to water trucks. Whether in summer or winter, water trucks can play a certain role. The normal operation of a water truck is to sprinkle water. Before sprinkling water, it is necessary to perform a water suction operation. The water truck manufacturer reminds that some issues need to be noted when performing the water suction operation.

Problems to be noted when a water sprinkler truck is operating to draw water

If the water source is relatively shallow, it is necessary to dig the suction area deeper in advance to ensure that there are no impurities and no air enters. The clear water pump requires that there be no impurities in the water, while the turbid water pump requires that there be no stones or a large amount of silt in the water.

2. Before each suction of water, a certain amount of priming water must be added to the centrifugal water pump. When a self-priming water pump is used for the first time, it needs to be primed with water. After that, it does not need to be primed again.

3. When absorbing water, the inlet pipe system must maintain a certain vacuum degree. The inlet pipe system must be sealed reliably to prevent air leakage.

4. Whether before water suction or water spraying, the gear shifting of the power take-off device of the water sprinkler truck must be carried out when the vehicle is stationary.

Before winter comes, the water in the water pump and water pipes should be drained.

As a functional vehicle, the water sprinkler truck needs to be used continuously for a long time. Therefore, the maintenance work of the water sprinkler truck is particularly important. Only by doing a good job in the maintenance of the water sprinkler truck can the service life of the vehicle be extended. So, do not neglect the maintenance work.